| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Forging Forming Method: |
Mold Forging |
Product Description
M192 Guard roll forming machine
1. Brief introduction:
A. Simple structure and beautiful outlook;
B. Easy to setting and operation
C. Little noise and high working efficiency.
2. Main technology parameter:
The structure of equipment
1. Hydraulic decoiler
Single unrolling machine, one side can put material
Adopt automatic hydraulic system
Coil weight (Max): 7000kg
Coil dia (Max): 1600mm
Oil cylinder dia: 1200mm working pressure: 10mpa
Coil Width(Max. ): 500mm
2. Feeding, leveling
Feed into unit oriented wheel(can right and left adjust)
Into feeding roller, dia is ¢ 180mm, material 45# steel, quenched 48-52, chromed
Leveling is three roller above and four roller below, quenched and chromed
3. Punching (can right and left adjust)
Using hydraulic punching
Oil cylinder dia: 140mm
Working pressure: 20mpa
Mould material: Cr12 quenched 58-62
Hydraulic power: 7.5kw
Size: 1.5m long*1.1m wide*1.2m high
4. Roll forming
Main motor power: 45kw
Decelerating motor: BWD14-43-37kw, made in Shanghai or
Changzhou
Drive: Gimbal driving, 120*500
Main shaft dia: 100mm material: 45#forge steel
Roller material: GCR15 quenched 58-62, chromed
Roll station: 17stations
Timing by transducer: 5m--20m/min(not including punching)
Transducer: Panasonic made in Japan. 380V 50Hz
Computer: PLC
Computer operating panel: Touching screen
5. Cutting
Hydraulic cut
Knife material: Cr12, quenched 58-62
Oil cylinder dia: 250mm
Working pressure: 30mpa
Working journey: 80mm
6. The Outside size:
18m long*2.2m wide*1.5m high
7. Run out table
Jointed by 60mm*40mm tube (can be adjusted to up and down)
Size: 1.5mlong*0.8mwide*0.6-1mhigh(can be adjusted)
The parts of machine
Hydraulic passive Uncoiled, Forming Machine ( feeding, leveler, roll mill, cutting, punching, PLC computer, Hydraulic station, cutting), and simple run out shelves 3PCS, packing list 1 PCS.
8. The production flow of equipment
Decoiling_Feeding(take the sheet to the first station)_leveling----Punching of the sheet _roll forming----hydraulic cut to length-product packing manual.
Botou Zhongteng Machinery factory supply all kinds of roll forming machine, our main production: colored steel roll forming machine, Gusset plate machinery, C/Z purlin forming machine, double decked roll forming machine, floor deck roll forming machine, glazed tile roll forming machine, ridge tile roll forming machine, Roof Panel Roll Forming Machine, shutter door roll forming machine, Cutting machine, Bending machine, etc. We have advanced technology and equipment, detection means is consummate, and developed the automatic intelligent production line for roll forming machine.
Our company has perfect after-sales service network, can provide full support to you, helping you get the most satisfactory equipment, and insure you get the device timely to solve all the problems in process. We always put the interests of customers in the first place, and put the concept through design to after-sales service, enables our products to help customers improve efficiency, reduce costs, enhance competitiveness, we will completely according to your requirements and needs to carry on the design and manufacturing, and give you the most ideal machine.
