Product Description
Specification
Hydraulic Impact Crusher
1. Efficient and energy saving
2. High chrome hammer
3. Unique impact liner
4. Easy maintenance, reabiale operatio
5. CE ISO SGS approved
The working principle of Reversible Impact/Counterattack Hammer Crusher
Crushing process is as follows: after falling material into the crusher, meet the high-speed rotating hammer head; The blow by blow to the crusher inlet adjustable wear-resisting tooth plate, for the first time, after crushing, essentially the same material evenly into the crushing chamber, second main broken, in the main crushing cavity has been homogenization of material particles from the hammer to gain momentum again. High-speed rushed back cavity internal zigzag lining plate, after a sawtooth liner upward rebound, was again broken hammer head, at the same time the material is affected by the impact of each other, so repeated cycle. In the back cavity broken many times, was finally broken material from discharging mouth eduction, finely the material is the product.
2 main structure
This machine is mainly composed of crusher host, motor, hydraulic coupling, hydraulic station, suspension system, etc. Big rotor structure adopted, short pin, composite hammer head, up-down synchronous control device, and in the body inlet added wear-resisting tooth plate, has big crackdown, convenient operation and maintenance, and advantages of long service life of wearing parts. In addition, cancelled the old under the crusher of grate, enhanced water adaptability for the material, discharging, crushing fineness of the adjusting range is big. Crusher shaft forging by high quality alloy steel manufacturing, the material and heat treatment technology for decades, in the big section is very mature in the application of shaft parts. Hammer head is combination, thus saving a lot of wear-resistant alloy materials, reduce the production cost. Hammer head joint with stiffener, hit the end width widened, increased the intensity of hammer head, changed the original model the phenomenon of drop hammer head, greatly improving the safety and service life of hammer head. Hammer head by the spiral arrangement at the same time. This is very beneficial to reduce the air volume and defend. Host and motor through hydraulic coupling connection. Can shorten the motor starting time, reduce the average current in the process of starting, prevent overload power. Bearing lubrication directly by the hydraulic pressure station
Supply without artificial supply, reduce the labor intensity of workers.
Reversible counter reversible hammer crusher is the first is that they are, inversion is is turn down.
Secondly, counterattack hammer, is both counterattack crusher, hammer crusher features. Or can be said to be the reaction type, hammer type combination of products.
In addition to the hammer to break the closed, or a single piece of hammer crusher, hydraulic hammer crusher, and so on
The installation and maintenance
The maintenance of the machine:
1, all the load bearing of crusher bearing for machine, so good lubrication for the bearing life has a lot to do, it directly affects the service life of machine and availability, and requirements into lubricating oil must be clean and seal must be good, the machine's main oil (1) the rotation bearing (2) roll bearing (3) all the gear bearing, sliding plane (4) activities.
2, the tire of the newly installed prone to loosening should be check regularly.
3, pay attention to each part of the machine working normally.
4, pay attention to check the easy wear parts wear degree, attention to replace the worn parts at any time.
5, put activity unit chassis plane, should be out dirt and other material to avoid activities when machine can't broken material bearing can't move on the chassis, so that a serious accident.
6, bearing high oil temperature rise, should immediately stop to check the reason.
7, the rotation gear in sound operation, if there is impact should immediately stop check, and remove
2. Installation commissioning:
1, on the basis of the device should be installed in a horizontal concrete, land bolt is fixed.
2, when installation should pay attention to the main body of vertical and level.
3, check each part after installation bolt fastening, the presence of loosening and host storehouse door whether such as welcome to tighten.
4, according to the equipment power configuration of power and control switch.
5, check finished, empty load test, the test can be normal production.
My company in product sales, the interests of customers is our priority, we service the pursuit of refinement, from the pre-sale consultation and enthusiastic service to the sale of promotional products, we are required to seek fine fine.
(1) free appoint special after-sale service staff, arrived at the scene to guide customers installation and debugging.
(2) equipment installation and debugging.
(3) on-site training operators.
The finished product can be classified and combined according to the customers' needs. The dust removal equipment can be added in order to protect the environment.
In order to recommend suitable design for you, please kindly tell us:
1. What is your raw material, is it soft stone (like limestone, dolomite) or hard stone (like granite, basalt, river stone, etc)?
2. What is the maximum size of your raw material?
3. What are output size you want to crush?
4. What is capacity you want(tons/hour)?
This is a brief presentation of our impact crusher machine, if you have interest on our machine, pls feel free to contact us at any time!
Contact Person: summer
Model | Specifications | Size (mm) | Max feed size (mm) | Capacity (t) | Motor power (kw) | Overall Dimensions (L*W*H)mm | Weight (kg) |
| L | W |
| PF-0807 | φ750*700 | 400 | 730 | 300 | 15-30 | 45 | 2210*1490*2610 | 8100 |
| PF-1007 | φ1000*700 | 400 | 730 | 300 | 25-60 | 55 | 2400*1558*2660 | 9500 |
| PF-1010 | φ1000*1050 | 400 | 1080 | 350 | 50-80 | 75 | 2400*2250*2620 | 12200 |
| PF-1210 | φ1250*1050 | 580 | 1080 | 350 | 70-120 | 95 | 2690*2330*2890 | 14100 |
| PF-1214 | φ1250*1400 | 580 | 1430 | 350 | 130-180 | 132 | 2690*2688*2890 | 19600 |
| PF-1315 | φ1320*1500 | 860 | 1520 | 500 | 160-250 | 185 | 3096*3273*2667 | 21700 |
| PF-1320 | φ1320*2000 | 860 | 2030 | 500 | 200-310 | 300 | 3280*3570*2920 | 23400 |
Zhengzhou Sinolion Equipment Co., Ltd. is a high-tech Company which professional manufacturing the production of coal briquette equipment, building material equipment, and Mining machinery.
After 30 years of development, Sinolion is now setting up branches, integrating engineering, trade, research and development, production and sale to develop to be a large sized enterprise. Sinolion has modern standard workshops, as well as advanced technology and testing equipment. Extensively cooperating with coal research institutions and other research departments, SINOLION have continuously improved product values and performance. Now, 10, 000-300, 000 tons briquette production lines are renowned in domestic and foreign markets, and SINOLION products have been exported to Indonesia, Kazakhstan, Vietnam, North Korea, Egypt and other countries and regions. It is ideal equipment for briquetting mine power in the world market.
SINOLION provide space planning and design, equipment installation and commissioning support. Our company persists in the philosophy of ' ' Quality for survival, reputation and development' ' , and SINOLION strive to build a world well known brand to satisfy customers in order to let them rest assured with comfort. SINOLION Company is willing to take full use of the new technology, dedicated to providing superior products with reliable quality, favorable prices and perfect service for users who need us to design, manufacture and install coal production lines.
