Wind Turbine Shaft
Our new Turbine shaft workshop, is equipped with annual production capacity of 2000 sets of shafts. Finish machining and related inspection are processing in the constant temperature workshop, to keep high quality and production efficiency.
Main shafts specifications: 850KW, 1MW, 1.5MW, 2MW, 2.5MW, 3MW, and so on.
1. Sizes of wind turbine shaft:
1): Max. Diameter of flange: 2600mm
2): Max. Weight: 30T
2. Steel Grades:
Main materials are 34CrNiMo4, 42CrMo4, 34CrNiMo6, for wind turbine shafts as per requirement match and overmatch the chemical specification of EN10083, for we take measure in raw materials choosing and vacuum casting, which can effectively control the content of impurity elements and gas.
3. Chemical Composition(%)
State | C | SI | MN | P | S | CR | NI | MO | CU |
Melting Analysis | 0.30- 0.38 | 0.40 (MAX) | 0.40-0.70 | 0.025 (MAX) | 0.025 (MAX) | 1.40- 1.70 | 1.40- 1.70 | 0.15- 0.30 | 0.25 (MAX) |
Product Analysis | 0.28- 0.40 | 0.42 (MAX) | 0.38- 0.72 | 0.025 (MAX) | 0.025 (MAX) | 1.35- 1.75 | 1.35- 1.75 | 0.13- 0.32 | 0.25 (MAX) |
4. Mechanical Property
Sampling Position | Yield Strength | Tensile Strength | Elongation | Reduction of area | Impact Value(J) -40ºC |
Longitudinal, 12.5mm below the surface | 650 min | 850-1000 | 13 min | 55 min |
|
Longitudinal, 1/3R below the surface | 625 min | 850 min | 13 min | 52 min | Avg, 40 min Single, 27 min |
Transverse, flange | 625 min | 850 min | 13 min | 52 min | Avg, 40 min Single, 27 min |
Qingdao Helio Steel Co., Ltd. Was established in March19, 2012. Our company's business staff members possess professional service capabilities of steel products, with more than a decade of experience on steel production, technology development, product sales and foreign trade. We comply the principle of friendly cooperation and mutual benefit, and persist in developing together with new and old customers.
Our company is located in Qingdao, a coastal city of Shandong Province, which is near Laiwu Steel Group. Only Laiwu City has steel production capacity of 20 million tons each year. Meanwhile, it is also the largest production base of powder metallurgy products in the whole country. Otherwise, there are more than ten well-known steel manufacturers within the province and the surrounding areas, so steel resources here is abundant and we can meet customers' various requirements.
Our company is mainly engaged in steel products for various specifications and materials, such as continuous casting billets, continuous casting tubes, hot-rolled bars, tubes, hot-rolled square steel, flat steel, H section steel, hot-rolled coils, cold-roll large-size panels, forging materials, and forgings.
We also run the import and export of steel products, based on the needs of customers at home and abroad to develop a variety of special steel products and timely delivery. I hope to sincerely cooperate with domestic and foreign customers, providing high-quality and low-priced products and professional services.