Corrosion and Abrasion Resisting Cr Alloy Slurry Pump Spare Parts
| Price: |
US $ 50/Piece |
| Trade Terms: |
FOB,CFR,CIF |
| Min Order: |
1/Piece |
| Pay Type: |
L/C,T/T,D/P,Paypal,Money Gram |
Corrosion and abrasion resisting Cr alloy slurry pump spare parts
1. APPLICATION OF THE PUMP PARTS:
The Chrome alloy long service life centrifugal casting slurry water pump partadapt to pumps, which are widely used in transport water or slurry with strong corrosive proof and high concentration for many industries such as metallurgy, mine, coal, electric power, building materials and other industry.
2. MATERIAL OF SLURRY PUMP PARTS:
Rubber: Natural Rubber, Nitrile Rubber, Polychloroprene
Metal: (High) Chromium Alloy,Nodular Case Iron, Ductile Gray Iron, and Stainless Steel(ss314.ss316)
Materials
Type |
Code |
Mark |
Mechanism Performance |
Special Performance |
Application |
δw/δb
MPa |
αk
J/cm2 |
HRC |
Anti-wear white iron |
A05 |
KmTBCr27 |
≥700 |
6-10 |
≥56 |
Erode resistance is a little bit lower than A07 with certain corrosive resistance |
Used for higher wear condition with PH between 5 and 12 |
A07 |
KmTBCr15Mo |
≥550 |
4-8 |
≥59 |
Best erode resistance but lower wear resistance than A05 |
Used for higher wear condition |
A01 |
KmTBCr8 |
≥550 |
6-8 |
≥55 |
The erode resistance is about 0.9 times of A05. |
Used for mud pump |
A11 |
KmTBMnMo |
≥400 |
3-6 |
38-42 |
Lighter erode resistance and lower hardness. It can be perforated and tapped. |
Used for light wear condition with fine grain. |
Anti- wear &anti-corrosive iron |
A49 |
-- |
≥600 |
-- |
43 |
It has certain erode and corrosive resistance in low PH condition. Its wear resistance is nearly equal to A03 |
For lower PH condition,especially for flue gas. For low sour condition desulphuration installation (PH≥4) |
A33 |
-- |
-- |
-- |
35 |
It has certain erode and corrosive resistance that is similar to A03 and certain corrosive resistance. |
It can transport oxygenated slurry with PH not be less than 1. |
Anti-wear cast steel |
A22 |
-- |
1200 |
-- |
45 |
Fine anti-erode & anti-corrosive, high hardness. |
Used for dredge pump casing. |
A23 |
-- |
700 |
-- |
HB500-600 |
Higher hardness and anti-erode. |
Used for anti-wear &corrosive and high erode condition. |
A25 |
-- |
-- |
-- |
HB300-350 |
Lower hardness, better anti-wear & anti-corrosive and weldable. |
Used for light erode and wear condition. |
1. Pump Casing
Split outer casing design with cast or ductile iron with the wearing liners , which can provide high operating pressure capabilities.
2. Impeller
The impeller may be either molded elastomer or hard metal. Cast-iron impeller threads are better suited for slurries.
3. Interchangeable Hard Metal and Moulded Elastomer Liners
4.Mating faces in hard metal liners are tapered to allow positive alignment during assembly and allow components to be easily removed or replacement.
5. Impeller The impeller may be either molded elastomer or hard metal. Cast-iron impeller threads are better suited for slurries.
6. Hydraulic seal rings give positive sealing between mating faces.
| Prod Model: |
slurry pump spare parts |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Pump Parts Condition: |
New |
| Pump Parts OEM: |
Available |
| Material: |
Alloy Metal or Rubber |
| OEM: |
Available |
| Impeller Number: |
Single-Stage Pump |
| Working Pressure: |
High Pressure Pump |
| Influent Type Of Impeller: |
Single Suction Pump |
| Position Of Pump Shaft: |
Horizontal Pump |
Shijiazhuang An Pump Machinery Co., Ltd is a professional manufacturer of slurry pumps, sewage pumps, clean water pumps, chemical pumps, fire pumps, irrigation pumps; An Pump Machinery company has its own strong type selection & design, research and development team, assure to provide efficient, energy saving design, use and maintenance solutions for slurry pumps, sewage pump, water pump, chemical pumps, fire pumps, irrigation pumps.
An Pump Machinery's products slurry pumps, sewage pump, water pump, chemical pumps, fire pumps, irrigation pumps and other products are exported to over 90 countries around the world. The application covers many fields, such as dressing ship, tailings transportation, mining pumps, steel & power desulphurization, boiler feed water, construction, irrigation, water conservancy facilities, sewage treatment.
Strong, experienced technical personnel is the powerful guarantee for quality products of slurry pumps, sewage pump, water pump, chemical pumps, fire pumps, irrigation pumps. An Pump Machinery technical team set up five R & D teams: Hydraulic engineering, water pump structure, new materials research and development, casting, molding etc. Except the commonly used CAD and other design software, the technical teams also use CAPP computer-aided industrial design and CFD hydraulic design software. They combine years of experience in the practical application of the products, repeated use of water conservancy GIS, MIS software and simulation analysis system software demonstrated, calculations, the theoretical calculations product of slurry pumps, sewage pump, water pump, chemical pumps, fire pumps, irrigation pumps are accurate and consistent with the actual performance. It allowing users to meet the needs while significantly reducing the investment costs, improves An Pump Machinery Company's strong core competitiveness.
An Pump Machinery Company's production line are well-equipped, such as casting furnaces, vertical lathe, cutting tools, boring and milling machining centers production line equipment are fully automatic data control; Precision casting molds and resin-bonded sand, precoated sand casting process, is a powerful pump parts guarantee of quality and appearance; Automatic curve heat treatment furnaces control pump accessories heat treatment process automatically and appropriately; International advanced pump detection equipment for signal acquisition, digital filtering and calibration ensure the accuracy of the data; Spectrograph, liquid analyzers and other testing equipment ensure the reliability and stability of the material; These advanced manufacturing and testing equipment ensure the quality and stability of the products.
For the research and development of new materials for slurry pumps, sewage pump, water pump, chemical pumps, fire pumps, irrigation pumps, An Pump Machinery's engineers constantly strive to explore casting and set up a new materials R&D team. The products meet API610 standards, in addition to Cr27, high-chromium alloy, SS304, SS316, SS904, CD-4MCU, duplex stainless steel and other wear & corrosion resistant alloys, R-type rubber corrosion resistant heavy flow components, corrosion-resistant high-strength teflon material, high-crystalline silicon ceramic corrosion-resistant materials were gradually developed. This reached advanced level in domestic and international.
In the era of rapid development of science and technology, An Pump Machinery team takes the entrepreneurial spirit "excellent and constant product quality, brand known worldwide", business purpose "the achievements of create brand enterprise and industry pioneer", to help you out and provide quality & cheap innovative products, with corporate philosophy of strong technical specialists and sophisticated equipment as backup, and work together with you to create brilliant!
